¶ Video Guide
Watch Accessories Installation
¶ Important Notice
Use only compatible mounting points. Accessories must not block cameras, LiDAR, other sensors, lights, moving mechanisms, the seat belt, or entry and exit paths.
¶ Procedures
¶ Rear Storage — 00:02
- Confirm that the rear-storage accessory and mounting hardware are complete.
- Locate the rear mounting position shown.
- Align and secure the accessory.
- Pull gently to verify security and check clearance from wheels and sensors.
¶ Side Storage — 01:06
- Confirm the installation side and accessory orientation.
- Secure the side-storage accessory at the position shown.
- Check that armrest folding, seat-width adjustment, and entry remain unobstructed.
- Load an item and verify clearance from the wheels.
¶ Phone & Cup Mount — 02:06
- Select a position that does not obstruct the joystick, buttons, or screen.
- Align and secure the mount as shown.
- Set the angle and lock it.
- Insert a phone or cup and verify that steering, armrest folding, and entry remain clear.
¶ End Notes
Perform a low-speed check after installing an accessory. Stop using and reinstall any accessory that becomes loose, interferes with movement, or obstructs a sensor.