This chapter covers Strutt ev¹ seat, backrest, armrest, control-module, and storage-accessory adjustments.
Video source: Strutt Official YouTube Channel
Product: Strutt ev¹
Last verified: 2026-08-26
Make all ergonomic adjustments while the device is stationary and free of unstable loads. Relock every mechanism and confirm stability and comfort with a stationary seating check.
Keyframe placeholders:
images/02-tailor-your-ride/01-seat-height-release.png— Release point after00:05.images/02-tailor-your-ride/02-seat-height-level.png— Selected level and locked state.
Keyframe placeholder:
images/02-tailor-your-ride/03-backrest-height.png; capture at03:00–03:23.
Keyframe placeholder:
images/02-tailor-your-ride/04-seat-width.png; capture at03:28–04:45.
Keyframe placeholder:
images/02-tailor-your-ride/05-armrest-height.png; capture at04:52–06:05.
After adjustment, perform a stationary seating check. Confirm comfortable positions for the foot support, seat, backrest, armrests, joystick, and seat belt before a low-speed test.
Power off before installation or side conversion. Protect the control-module cable and connector, and keep the cable clear of the armrest folding and adjustment mechanisms.
Keyframe placeholders:
images/02-tailor-your-ride/06-right-control-position.png— Right-side module orientation.images/02-tailor-your-ride/07-right-control-lock.png— Fully locked state.Suggested capture window:
00:05–02:05.
Keyframe placeholders:
images/02-tailor-your-ride/08-left-control-transfer.png— Module transfer.images/02-tailor-your-ride/09-left-control-lock.png— Completed left-side installation.Suggested capture window:
02:12–04:30.
Keyframe placeholder:
images/02-tailor-your-ride/10-screen-angle.png; capture at04:38–05:20.
The control module can be installed on either side. Test the screen, joystick, and buttons while stationary before conducting a low-speed functional test.
Watch Accessories Installation
Use only compatible mounting points. Accessories must not block cameras, LiDAR, other sensors, lights, moving mechanisms, the seat belt, or entry and exit paths.
Keyframe placeholders:
images/02-tailor-your-ride/11-rear-storage-mount.png— Rear mounting points.images/02-tailor-your-ride/12-rear-storage-installed.png— Completed installation.
Keyframe placeholders:
images/02-tailor-your-ride/13-side-storage-mount.png— Attachment position.images/02-tailor-your-ride/14-side-storage-clearance.png— Wheel and armrest clearance.
Keyframe placeholder:
images/02-tailor-your-ride/15-seat-storage.png; capture at01:40–02:02.
Keyframe placeholders:
images/02-tailor-your-ride/16-phone-cup-mount.png— Mounting position and orientation.images/02-tailor-your-ride/17-accessory-clearance.png— Final operating clearance.Suggested capture window:
02:08–03:38.
Perform a low-speed check after installing an accessory. Stop using and reinstall any accessory that becomes loose, interferes with movement, or obstructs a sensor.